MR2 Owners Club • Japfest 2016 - April 24th - Silverstone Circuit - Page 9
Page 9 of 9

Re: Japfest 2016 - April 24th - Silverstone Circuit

Posted: 25/04/16 10:53
by Samreedy
Very nice! Gota get mine a little nicer and I'll be along to a few

Sent from my E6653 using Tapatalk

Re: Japfest 2016 - April 24th - Silverstone Circuit

Posted: 25/04/16 10:55
by SonicSW20
If it's got an MOT, it's taxed, and it's insured, it's nice enough to belong on our stands at any show :th:

Re: Japfest 2016 - April 24th - Silverstone Circuit

Posted: 25/04/16 18:02
by Samreedy
Haha, I've seen many a car that doesn't belong at a show!

Just gota sort scrapes and scratches out

Out of interest the white mk2 in the photos has a smaller plate positioned a little lower.... I want! What size is it? And where can I get a bracket for it?

Sent from my E6653 using Tapatalk

Re: Japfest 2016 - April 24th - Silverstone Circuit

Posted: 25/04/16 18:03
by AW11 Myles
Thanks for welcoming a very ordinary Mk1 amung some very special Mk2's you have. Seemed everyone either had a V6 or massive turbo! :laughing

Re: Japfest 2016 - April 24th - Silverstone Circuit

Posted: 25/04/16 18:19
by MRHAPPY62
AW11 Myles wrote:Thanks for welcoming a very ordinary Mk1 amung some very special Mk2's you have. Seemed everyone either had a V6 or massive turbo! :laughing
My Rev 1 That followed you from Tescos was an N/A and yours definately didn't look out of place :clapping:

Re: Japfest 2016 - April 24th - Silverstone Circuit

Posted: 25/04/16 22:47
by peteV6R5
Samreedy wrote:Haha, I've seen many a car that doesn't belong at a show!

Just gota sort scrapes and scratches out

Out of interest the white mk2 in the photos has a smaller plate positioned a little lower.... I want! What size is it? And where can I get a bracket for it?

Sent from my E6653 using Tapatalk
import holder and import plate size. - same as on my REV5 cosmos, just got a slightly bigger plate

Re: Japfest 2016 - April 24th - Silverstone Circuit

Posted: 26/04/16 8:11
by Samreedy
Cheers mate, thought import plates were square.... I'll have a look and see if I can get one

Sent from my E6653 using Tapatalk

Re: Japfest 2016 - April 24th - Silverstone Circuit

Posted: 26/04/16 9:15
by chris
Samreedy wrote:Out of interest the white mk2 in the photos has a smaller plate positioned a little lower.... I want! What size is it? And where can I get a bracket for it?
that's mine, the TRD front bumper doesn't have a bracket, it has a recess in the bumper... you can just about see it in the following photo:
Image

the plate size is 13" x 3.5" (330mm x 89mm), if I put a standard import sized plate on it (13" x 6"), it affects the engine temperature dramatically as it reduces the amount of air intake for the radiator as it covers the scoop...
Image

You can buy direct replacement brackets for the import sized plate to bolt onto a standard UK front bumper... I've done it to my last 2 n/a's, and it makes the front look a lot better and cleaner (although not road legal)...
Image
Image

Re: Japfest 2016 - April 24th - Silverstone Circuit

Posted: 26/04/16 11:38
by Samreedy
Very nice, I'm thinking of having the front clean and having a slightly smaller plate a bit lower in the top of the grill, or maybe one of the bendable ones.... Hmmm choices haha

Sent from my E6653 using Tapatalk