Technical Disclaimer 

The MR2 Owners Club and its respective owners, editors and contributors make no representations about the suitability of the information contained in the documents, materials and related graphics published on mr2oc.co.uk  

By entering this site, you hold this site and it's affiliates not legally responsible for any damages due to advice given here. This site and it's affiliates takes no responsibility for consequences of any actions that arise from advice given. Any opinion is given with information provided by you and can not be taken as absolute.

All repairs should be undertaken by a competent and qualified technician. By using this site, you understand and agree that all advice given and followed are at your own risk and do not hold this site or it's affiliates responsible for any damages.

Knowledge Base - Info:- Unused Cruise Control Wiring

Cruise Control Wiring

UK cars have most of the wiring for cruise control, since very few if any UK cars have cruise control, this wiring is unused.
This means that there are spare wires running from the the rear boot to the engine bay and to behind the dashboard that can be utilised as required for connecting up extra's

 

Views are all looking at the plugs

pic1

  • 1. Black to plug F pin 1
  • 2. Red / Black to Plug G2
  • 3. Green / Red to plug 34 pin 5
  • 4. Yellow / Red to Plug I pin 2
  • 5. Green / Yellow to plug 34 pin 1
  • 7. Violet / White
  • 8. Red / Yellow to plug 34 pin 6 (MK1a)
  • 9. Black to plug G pin 1
  • 10. Red to plug 34 pin 8
  • 11. Black to plug H pin 3
  • 12. Green / White to plug C pin 1
  • 13. White / Black Chassis earth
  • 14. White / Black to plug I pin 1
  • 15. Green / White +12v from Brake lights
  • 16. Red / White unswitched +12v (STOP fuse 10A)
  • 17 Green / Black to plug 34 pin 2
  • 18. Red / Yellow to plug 34 pin 6 (MK1b)

pic2

  • 1. Green / Yellow to plug A pin 5
  • 2. Green / Black to plug A pin 17
  • 3. Red / Blue, Ignition controlled +12v (TURN-GAG fuse 7.5A)
  • 5. Green / Red to plug A pin 3
  • 6. Red / Yellow to plug A pin 8
  • 7. White / Black Chassis earth
  • 8. Red to plug A pin 10

pic3

  • 1. Green / White to plug A pin 12
  • 2. White / Black Chassis earth

Circuit between pins 1 & 2 when Handbrake is on

pic4

  • 1. Black to plug A pin 1
  • 2. White / Black Chassis earth

pic5

  • 1. Black to plug A pin 9

pic6

  • 1. Yellow / Red to plug A pin 4
  • 2. White / Black to plug A pin 14
  • 3. Green / Red to plug G2

Jimi
04/05/2006


Copyright © by MR2 Owners Club All Right Reserved.

Details

Created : 2011-08-27 00:54:13, Last Modified : 2011-08-27 00:54:13

User Comments