Knowledge Base - How To:- Stop a Squeaking Clutch Pedal.

I can hear a squeek when I push the clutch pedal. You have the classic clutch release arm pivot creak. This is very common on the MR2.

Always insist your mechanic lubes this joint good and proper when your clutch is ever replaced as its tucked away inside the bellhousing. A Toyota dealer should do this automatically as it is specifically mentioned in the Toyota BGB.

You may be able to lubricate the joint with a very carefully aimed squirt of spray grease using a long straw attached to the spray nozzle, but the easiest solution is to turn your radio up! In all honesty you'll only hear the noise when stationary.

Peter Jones
23-11-2007


Copyright © by MR2 Owners Club All Right Reserved.

Details

Created : 2011-08-27 12:34:51, Last Modified : 2011-08-27 12:34:51

User Comments

Technical Disclaimer 

The MR2 Owners Club and its respective owners, editors and contributors make no representations about the suitability of the information contained in the documents, materials and related graphics published on mr2oc.co.uk  

By entering this site, you hold this site and it's affiliates not legally responsible for any damages due to advice given here. This site and it's affiliates takes no responsibility for consequences of any actions that arise from advice given. Any opinion is given with information provided by you and can not be taken as absolute.

All repairs should be undertaken by a competent and qualified technician. By using this site, you understand and agree that all advice given and followed are at your own risk and do not hold this site or it's affiliates responsible for any damages.