Knowledge Base - Info:- ST205 Charge Cooler Pump - Bearing Numbers

If you have carried out the ST205 Charge cooler conversion and found the charge cooler pump has started to make abnormal / loud noises during operation this is normally due to worn bearings inside the pump.
The total cost for both bearings is less than £5, a lot cheaper than second hand or refurbished pump, the bearings can be found on eBay. The bearings required are:-

609RS x1
629RS x1

I will soon refurbish my pump and write up a technical how to, I just thought in the mean time I can help someone else by supplying the information about the correct bearings to use.

Jonathan

Copyright © by MR2 Owners Club All Right Reserved.

Details

Created : 2011-10-05 15:41:47, Last Modified : 2011-10-05 15:41:47

Technical Disclaimer 

The MR2 Owners Club and its respective owners, editors and contributors make no representations about the suitability of the information contained in the documents, materials and related graphics published on mr2oc.co.uk  

By using this site, you hold the site and it's affiliates not legally responsible for any damages due to advice given here. This site and it's affiliates takes no responsibility for consequences of any actions that arise from advice given. Any opinion is given with information provided by you and can not be taken as absolute.

All repairs should be undertaken by a competent and qualified technician. By using this site, you understand and agree that all advice given and followed are at your own risk and do not hold this site or it's affiliates responsible for any damages.