Knowledge Base - How To:- Headlamp Flash Without Lamps Staying Up

It is possible to override the first position of the headlamp control switch. This means you can drive with your side lamps or fog lamps on and flash your headlamps without them staying in the locked up position.

Firstly locate the headlamp control box. This is the blue box located next to front compartment fuse box.

Unplug the wiring connector. If you look carefully at the plug you will see the terminal numbers. Locate terminal 6 (red wire). Cutting this wire will stop the lights staying up.

Be careful to insulate both ends of the wire. It is recommended that a small switch be installed between the wires, so that you can reactivate the lock to allow you to easily clean your headlamps and carry out bulb replacements.

 !_Maverick_!


Copyright © by MR2 Owners Club All Right Reserved.

Details

Created : 2011-10-06 10:00:15, Last Modified : 2011-10-06 10:00:15

User Comments

Technical Disclaimer 

The MR2 Owners Club and its respective owners, editors and contributors make no representations about the suitability of the information contained in the documents, materials and related graphics published on mr2oc.co.uk  

By entering this site, you hold this site and it's affiliates not legally responsible for any damages due to advice given here. This site and it's affiliates takes no responsibility for consequences of any actions that arise from advice given. Any opinion is given with information provided by you and can not be taken as absolute.

All repairs should be undertaken by a competent and qualified technician. By using this site, you understand and agree that all advice given and followed are at your own risk and do not hold this site or it's affiliates responsible for any damages.