Knowledge Base - How To:- Replace the Fog Lamp Unit / Bulb

Answer

Click thumbnails for larger images

Fog lamp screws rusted in!

Unfortunately it is very common for the small crosshead screws holding the fog lamp lenses in place to corrode badly. This results in rounding off the screws head when you attempt to undo them. The easiest solution is to use a long drill bit to drill out the screw without running the risk of damaging the bumper with the drills chuck. Your local DIY superstore should carry an extended length drill bit in stock. Once drilled out you can secure the lamp with a new self tapping screw.

Phatmeister

Copyright © by MR2 Owners Club All Right Reserved.

Details

Created : 2011-10-06 10:12:53, Last Modified : 2011-10-06 10:17:37

User Comments

Technical Disclaimer 

The MR2 Owners Club and its respective owners, editors and contributors make no representations about the suitability of the information contained in the documents, materials and related graphics published on mr2oc.co.uk  

By entering this site, you hold this site and it's affiliates not legally responsible for any damages due to advice given here. This site and it's affiliates takes no responsibility for consequences of any actions that arise from advice given. Any opinion is given with information provided by you and can not be taken as absolute.

All repairs should be undertaken by a competent and qualified technician. By using this site, you understand and agree that all advice given and followed are at your own risk and do not hold this site or it's affiliates responsible for any damages.