Knowledge Base - How To:- Replace the gear lever gaiter

The handbrake cover is very easy to fit. Takes no more than 15 mins.
You can purchase the handbrake cover and gaiter from numerous sources, including ebay!
BEFORE

pic1

 

1) Remove the leather cover over the handbrake handle to reveal the rubber beneath...

 

pic2

 

2) Slip on the new leather gaiter and cut the rubber off to the length of the new shaft

 

pic3

 

3) Slip on the aluminium grip and secure in position with the screws.

 

pic4

 

4) Glue the new leather gater in place.

 

pic5

 

5) The whole job is easier is you remove the centre console, so that you can glue the leather gater in place with ease as shown.

 

pic6

 

6) You should end up with something like this:

 

pic7

 

Good luck!
Kourosh

Copyright © by MR2 Owners Club All Right Reserved.

Details

Created : 2011-10-06 11:55:34, Last Modified : 2011-10-06 11:55:34

Technical Disclaimer 

The MR2 Owners Club and its respective owners, editors and contributors make no representations about the suitability of the information contained in the documents, materials and related graphics published on mr2oc.co.uk  

By using this site, you hold the site and it's affiliates not legally responsible for any damages due to advice given here. This site and it's affiliates takes no responsibility for consequences of any actions that arise from advice given. Any opinion is given with information provided by you and can not be taken as absolute.

All repairs should be undertaken by a competent and qualified technician. By using this site, you understand and agree that all advice given and followed are at your own risk and do not hold this site or it's affiliates responsible for any damages.