rev1 turbo lump into rev2 body. wire harness confusion

Considering a turbo or V6 conversion then use this forum
The forum Administrator has chosen to advise you that this topic is 5 years and 3 weeks old and that you may wish to begin a new topic or use the search feature to find a similar but newer topic.
User avatar

Topic author
ionfly

rev1 turbo lump into rev2 body. wire harness confusion

Post by ionfly »

I'm swapping out a rev1 turbo lump into a rev2 na body. Both jdm so not UK spec.

I'm having difficulties with a body loom socket not fitting a turbo loom plug.

I basically need to know which wires to solder to corasponding ones on the opposite loom.

Can anyone please help as the colours on the wires Do not marry up and I'm worried to damage anything :confused1:

Engine loom

Image

Image

Body loom


Image

Image


Quick Reply

   
The forum Administrator has chosen to advise you that this topic is 5 years and 3 weeks old and that you may wish to begin a new topic or use the search feature to find a similar but newer topic.

Return to “Engine Conversions”