Starter motor removal questions (MK2 NA SW20)
Forum rules
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Important ! - Please make your topic title as descriptive as possible . titles with just "help" generally dont get as many answers as a title that points to the problem
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Important ! - Please make your topic title as descriptive as possible . titles with just "help" generally dont get as many answers as a title that points to the problem
-
Topic author - Posts: 36
- Joined: 17/06/18 17:04
- Years of MR2 Ownership: 1
- MR2's Owned: 1
- Real Name: Andrew den Bakker
- Gender: Male
- Location: Uxbridge (weekdays) / Netherlands (weekend)
Starter motor removal questions (MK2 NA SW20)
Before I do something drastically wrong attempting to remove the starter motor in my MK2 SW20...:
the BGB states to (b) "remove the nut, and disconnect the starter cable", then (c) "remove the nut and disconnect the starter wire" - In my case the starter cable and the starter wire are held in place by the same nut (and are on the same bolt). Is this correct?
Following in the BGB: (d) "disconnect the starter connector" - how is this disconnected (is it a regular type clip?)
Finally: (e) "remove the two bolts, wire clamp and starter" - how is the wire clamp held in place? (more inaccessible bolts?)
Thanks for any useful tips&tricks!
Cheers,
Andrew
the BGB states to (b) "remove the nut, and disconnect the starter cable", then (c) "remove the nut and disconnect the starter wire" - In my case the starter cable and the starter wire are held in place by the same nut (and are on the same bolt). Is this correct?
Following in the BGB: (d) "disconnect the starter connector" - how is this disconnected (is it a regular type clip?)
Finally: (e) "remove the two bolts, wire clamp and starter" - how is the wire clamp held in place? (more inaccessible bolts?)
Thanks for any useful tips&tricks!
Cheers,
Andrew
-
- Posts: 848
- Joined: 29/01/11 18:53
- Years of MR2 Ownership: 9
- MR2's Owned: 1
- Real Name: Jan Olsson
- Gender: Male
- Location: Leicester
- Been thanked: 1 time
Re: Starter motor removal questions (MK2 NA SW20)
Get your phone down there and take a snap of the electrical connections.
Basically you have ring terminals for the live and the solenoid and the earth.
Pay attention to which terminal each ring goes on with the earth on one of the securing bolts
Basically you have ring terminals for the live and the solenoid and the earth.
Pay attention to which terminal each ring goes on with the earth on one of the securing bolts
1991 rev 1 T Bar n/a 3sge import. A work in progress!!!