Map sensor rev 3 turbo

This section is for technical Q & A
Please try the search function before starting a new thread.
Forum rules
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Important ! - Please make your topic title as descriptive as possible . titles with just "help" generally dont get as many answers as a title that points to the problem
The forum Administrator has chosen to advise you that this topic is 4 years and 11 months old and that you may wish to begin a new topic or use the search feature to find a similar but newer topic.
User avatar

Topic author
ej2_sir
Posts: 1
Joined: 17/07/07 20:33
Years of MR2 Ownership: 0
Location: Derby

Map sensor rev 3 turbo

Post by ej2_sir »

After a bit of advice really. Just put my rev 3 turbo back on the road after 6 years and everything was reasonable. Not making full boost around 12psi in 3rd(has manual boost controller set to 17 psi). Whipped off the intercooler pipes to re seal, checked a few vacuum hoses etc and when restarted car neither the stock boost gauge or aftermarket one is working? The aftermarket gauge is tee off the map.The car is making boost on a short drive. Any pointers or ideas. I've checked hoses. Ive also plugged the diagnostic which is showing code 21 (02 sensor) which I need to clear and see if it returns


Quick Reply

   
The forum Administrator has chosen to advise you that this topic is 4 years and 11 months old and that you may wish to begin a new topic or use the search feature to find a similar but newer topic.

Return to “MK2”