How much BHP and Torque will I make?
Forum rules
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Important ! - Please make your topic title as descriptive as possible . titles with just "help" generally dont get as many answers as a title that points to the problem
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Important ! - Please make your topic title as descriptive as possible . titles with just "help" generally dont get as many answers as a title that points to the problem
-
Topic author - Posts: 60
- Joined: 22/11/19 18:20
How much BHP and Torque will I make?
Hi guys,
Quick question.
I am currently building a track car, see specs below. I was wondering if you could let me know roughly what power you would expect it to make? Fly wheel horse power & torque lbs/ft
1994 rev 3 turbo (engine healthy)
Ct20b
St205 charge cooler
Manual boost controller set to 15psi
3 inch decat down pipe from rogue
3 inch full Free flowing exhaust
Hks air filter
Other mods include slotted discs, ebc yellow stuff pads, kw coil overs, front strut brace
Quick question.
I am currently building a track car, see specs below. I was wondering if you could let me know roughly what power you would expect it to make? Fly wheel horse power & torque lbs/ft
1994 rev 3 turbo (engine healthy)
Ct20b
St205 charge cooler
Manual boost controller set to 15psi
3 inch decat down pipe from rogue
3 inch full Free flowing exhaust
Hks air filter
Other mods include slotted discs, ebc yellow stuff pads, kw coil overs, front strut brace
-
- Posts: 1474
- Joined: 20/04/11 23:18
- Current Model: None
- Years of MR2 Ownership: 23
- MR2's Owned: 1
- Real Name: 2023 i30N Hatch 6MT
- Gender: Male
- Location: Tauranga >>> New Zealand
- Been thanked: 1 time
- Contact:
Re: How much BHP and Torque will I make?
Flywheel is just a guess from most dynos basically your still looking at stock power. Gains are hard to get without more boost and just a few bolt on bits dont make that much difference. Basically you end up getting the factory quoted flywheel power at the wheels If your lucky. Put it on a decent dyno the gains are not great without quite a bit of internal engine work.
-
- Posts: 326
- Joined: 05/04/06 1:00
- Years of MR2 Ownership: 5
- Gender: Male
- Location: Alexandra, New Zealand
- Been thanked: 4 times
Re: How much BHP and Torque will I make?
I’d crank your boost up to 17psi which should see you around 265whp. From there it starts to get expensive.