Can you support SW20 on frame rails?
Forum rules
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Important ! - Please make your topic title as descriptive as possible . titles with just "help" generally dont get as many answers as a title that points to the problem
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Important ! - Please make your topic title as descriptive as possible . titles with just "help" generally dont get as many answers as a title that points to the problem
-
Topic author - Posts: 54
- Joined: 01/03/20 11:37
- Current Model: MK2
- Years of MR2 Ownership: 2
- MR2's Owned: 1
- Real Name: Padraig Rabbitte
- Gender: Male
- Location: Ireland
Can you support SW20 on frame rails?
The sills on my MR2 r completely fecked so I was wondering can you put the jack stands on the frame rails instead of the sills? I haven’t been able to really find the right answer, From what I’ve read you can’t lift the car from the frame rails. Couldn’t find anything bout putting jack stands on them though.
It’s a rev 3 T-Bar if it makes a difference
Cheers,
Padraig
It’s a rev 3 T-Bar if it makes a difference
Cheers,
Padraig
-
- Posts: 182
- Joined: 18/01/10 8:20
- Current Model: MK2
- Years of MR2 Ownership: 5
- MR2's Owned: 3
- Gender: Male
- Location: Yorkshire, England
- Has thanked: 2 times
- Been thanked: 3 times
- Contact:
Re: Can you support SW20 on frame rails?
- MR2 Rev5 2.0 GTi TBar 2008 - 2011
- MR2 Rev5 Turbo GTS TBar 2020 - Present
- MR2 Rev3 Turbo GTS Donor car (RIP)
www.instagram.com/fuel_toyota
My Project thread
-
- Posts: 182
- Joined: 18/01/10 8:20
- Current Model: MK2
- Years of MR2 Ownership: 5
- MR2's Owned: 3
- Gender: Male
- Location: Yorkshire, England
- Has thanked: 2 times
- Been thanked: 3 times
- Contact:
Re: Can you support SW20 on frame rails?
You can use the rear central jacking point with a trolley jack and then just stabilise with a couple of axle stands either side. If you go to page 3 of my project thread (Link in signature) there is a picture of my old car when I did the same.
- MR2 Rev5 2.0 GTi TBar 2008 - 2011
- MR2 Rev5 Turbo GTS TBar 2020 - Present
- MR2 Rev3 Turbo GTS Donor car (RIP)
www.instagram.com/fuel_toyota
My Project thread
-
Topic author - Posts: 54
- Joined: 01/03/20 11:37
- Current Model: MK2
- Years of MR2 Ownership: 2
- MR2's Owned: 1
- Real Name: Padraig Rabbitte
- Gender: Male
- Location: Ireland
Re: Can you support SW20 on frame rails?
Cheers synz, nice to see you’ve got yourself another MR2 good luck with her