204bhp at 18psi! HELP!!!

This section is for technical Q & A
Please try the search function before starting a new thread.
Forum rules
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Important ! - Please make your topic title as descriptive as possible . titles with just "help" generally dont get as many answers as a title that points to the problem
User avatar

benckj
Posts: 318
Joined: 05/04/06 1:00
Gender: Male
Years of MR2 Ownership: 5
Location: Alexandra, New Zealand
Been thanked: 3 times

Re: 204bhp at 18psi! HELP!!!

Post by benckj »

Any decent mechanic can install a cam belt by themselves. There are several trick to do including use of bungee cords or paper dog clips. Believe the BGB has some pointers with this if your stuck.

Can verify can gears as mentioned above by pulling valve cover. I found it easy enough to remove the outer cam cover to inspect. Can use a mirror to view notch’s are in correct alignment with TDC or 0deg on crank shaft. Just ensure you are rotating engine clockwise when checking.


Post Reply

Return to “MK2”