96 4 wire o2 sensor confusion

This section is for technical Q & A
Please try the search function before starting a new thread.
Forum rules
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Important ! - Please make your topic title as descriptive as possible . titles with just "help" generally dont get as many answers as a title that points to the problem
Post Reply

Topic author
Gavin583
Posts: 5
Joined: 09/11/23 23:55

96 4 wire o2 sensor confusion

Post by Gavin583 »

Hello
Had to change front pipe on NA sw20 1996.
Previous owner or someone else had push connectors on the o2 sensor.
Of course I wasn't paying and in a rush didn't note the order.
On the loom side I have: black, orange, red/white stripe and yellow/brown
On sensor side: black, blue and 2 whites.

Anyone hazard a guess?
Getting car ready for mot and don't want to throw any warning lights on the dash.

Also when changing the front pipe I had a look at the back box and cat. Turns out the inside of the cat has been removed. Reading here and other forums seems the o2 sensor kicks in at a certain heat and with the cats inside cut out it might nit reach the correct temp. Doesn't sound accurate to me. Anyone on here have an opinion?

We all know this is the best forum anyways!
Attachments
PXL_20240706_130304182.jpg
PXL_20240706_130304182.jpg (138.85 KiB) Viewed 89 times


User avatar

jimi
Administrator
Administrator
Posts: 5294
Joined: 17/05/04 1:00
Years of MR2 Ownership: 18
MR2's Owned: 1
Gender: Male
Location: Glenrothes: The Kingdom of Fife
Has thanked: 50 times
Been thanked: 130 times
Contact:

Re: 96 4 wire o2 sensor confusion

Post by jimi »

As far as I can tell from the wiring diagrams, on the loom side the heater circuit is
red/white = from ecu
black/yellow = B+

The signal is
black = to ecu
brown = B- (earth)

The sensor I think is a bosch replacement
The 2 whites are the heater, polarity doesn't matter
Black is the signal to the ecu
Blue is earth (B-)
Black is not a colour ! .... Its the absence of colour
Image
Post Reply

Return to “MK2”