MR2 Owners Club • Body Panels Mk2 Rev1
Page 1 of 1

Body Panels Mk2 Rev1

Posted: 28/03/20 15:58
by Bru_lynn
I am looking for a good drivers side rear wing and ditto inner wing. I have found suppliers of body panels for Mk1s and for Mk3s, almost nothing for Mk2s, apart from front wings.
Can anyone help?

Re: Body Panels Mk2 Rev1

Posted: 23/04/20 20:20
by FirstMidship
I think the rear wings are quite an involved replacement, you'll inevitably have to find a donor car and angle grind that whole part off, if it's better than what you have and then have it welded on, paying attention to the swage lines, and the structure of the car.

Re: Body Panels Mk2 Rev1

Posted: 23/04/20 23:49
by peteV6R5
FirstMidship wrote: 23/04/20 20:20 I think the rear wings are quite an involved replacement, you'll inevitably have to find a donor car and angle grind that whole part off, if it's better than what you have and then have it welded on, paying attention to the swage lines, and the structure of the car.
no so, you can still get these from Japan, I know TLF has just had new one on his post accident damage ny 3rd party

Re: Body Panels Mk2 Rev1

Posted: 29/04/20 11:28
by Bru_lynn
Thanks for the replies. I have tried to locate a good s/h wing as First Midship's reply, so far no joy.
I have also spent time on Google and other search engines for suppliers of spares in Japan, also noluck, plenty of suppliers of everything except body panels. Question for peteV6R5, do you know where TLF got his from?