Recently got my car (05 reg) back from the MOT and new handbrake cables.
Shortly after this the engine management light came on. An OBD scan comes up with:
P0100
Mass air flow (MAF) sensor/volume air flow (VAF) sensor - circuit malfunction
Mass or Volume Air Flow Meter Circuit Malfunction
P003C
Intake camshaft profile control A, bank 1 - performance or stuck off
P004C
Turbocharger/Supercharger Boost Control "B" Circuit Low
It's a cheap reader with the torque app.
If I clear them the light comes back on after around 10 miles of driving with the same codes.
The car runs as well as it did before. It doesn't seem to cause any issues while driving.
I've given the MAF sensor a clean (with MAF cleaner).
Does anyone have any ideas what to look for next?
Thanks
P0100, P003C codes triggered.
Forum rules
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
Many subjects will have been discussed before. Please try the search function before starting a new thread.
Check in the Know Your 2 as the information you need may already be there.
-
jimi
- Administrator
- Posts: 5470
- Joined: 17/05/04 1:00
- Years of MR2 Ownership: 18
- MR2's Owned: 1
- Gender: Male
- Location: Glenrothes: The Kingdom of Fife
- Has thanked: 77 times
- Been thanked: 153 times
- Contact:
Re: P0100, P003C codes triggered.
given MR T never offered either on the MK3 I'd be looking for a second opinion on what the codes are 
Black is not a colour ! .... Its the absence of colour
-
LBound
Topic author - Posts: 4
- Joined: 20/07/22 15:23
