MR2 Owners Club • Roof vinyl has a gap where it meets the top of the window
Page 1 of 1

Roof vinyl has a gap where it meets the top of the window

Posted: 10/05/18 22:40
by neilw
My roof has a weird gap where the vinyl meets the roof frame at the top of the window - it almost looks like the roof is stretched but I don't think it is.

The roof strap is about where the roof straps fasten to the vinyl, so I was wondering if that could be to blame? (But I've checked the strap and it does go around the metal rod as I think it should)

It's worse on one side (the drivers side) than the other.

Is there any way to get the vinyl to cover the gap?

Image

Re: Roof vinyl has a gap where it meets the top of the window

Posted: 17/05/18 19:31
by je72
Mine's like that too. I've only had it a week so I've no idea if that's how it's supposed to look or not. It hasn't let any water in after two jet washes and a rain shower so I'm thinking it's probably ok.

Re: Roof vinyl has a gap where it meets the top of the window

Posted: 31/08/18 17:26
by Cayde-6
Mine also looks like that. I do have a small leak but its not from that part of the roof. I can see clearly where one of the rubber seals has deteriorated further along which is where the water gets in.

Re: Roof vinyl has a gap where it meets the top of the window

Posted: 01/09/18 6:42
by Topdownman
Thats normal I would say.

With the roof half up (down?) you should be able to pull the roof a bit to even up the gap on each side a bit but there is always that gap. I guess its like that so it folds away ok?