MR2 Owners Club

Guys!

We have the same thread running on the mk3 ROC and it's pretty cool to see what everyone's been doing to their MR2 today! Not sure if it's done here before or not, but it's what keeps me posting on the ROC regularly so would be good on here!

So, what've you done to your MR2 today?
Realise most might be in storage for winter, but anything MR2 related would be good!
I've bought some 5w/40 Fuchs supersynth fully synthetic + Genuine oil filter + Cam cover gasket for a nice little service when I get back in december. Plugs were recently changed too

ordered a missing headlight adjustment switch, not the most exciting thing but oh well

Today I've abused my MR2 and shall be doing the same on the way home from work

And cleaned the windows, again, dirty glass is annoying.

Won't be buying yours then

Mine always ends up with dirty glass, I've never managed to do the inside properly, mare!

Didnt use my daily today, But the recently bought G LTD i fitted a replacement fuel line from pump to filter, Shes been off the road not running for 3 years and i replaced the pump at the weekend fired her up (second turn of the key) walked round the back to check for leaks and sure enough i had a pin "censored" of a hole in a rusty pipe Shes all good now

Nothing. It's cold and has rained every day for nearly a whole week now.

hasnt rained in sussex

Replaced both front hubs. My wheel bearings were rough and a bit noisy. Couldn't really tell how bad they were until everything was stripped down.

Fitted my new ARB front bushes and put the front roll bar on the soft setting to match the rear.

Test drove it to B&Q (had to fix a plumbing leak in the house). Car is a lot less jittery now.

Now off to help Dom bleed his motorbike brakes. Busy day. Back to work tomorrow for a rest!

Drove it. This is quite rare!

Looked at it. Haha

Driven it.
Inflated my tyres

Drove it, filled it up, and drove it some more

HM

Re-fitted the scuttle panel & then ordered a new rear spat as one went walkies [emoji107]

good day today,chaged the sump gasket,and exhaust what a job that was,had to drill the 2 bolts out on the cat that the front pipe jointed to ,what a job