Knowledge Base - Info:- Audio ISO Connector Pinout

iso plug



Connections for Block A - Power

1) N/A 3) N/A 5) +12v output Blue 7) Battery + Red
2) N/A 4) Ignition +12v Yellow 6) Illumination Orange 8) Ground  Black
 

 

Connections for Block B - Speakers

1) Right Rear + Purple 3) Right Front + Grey 5) Left Front + White 7) Left Rear + Green
2) Right Rear - Purple/Blk 4) Right Front - Grey/Blk 6) Left Front - White/Blk 8) Left Rear - Grean / Black
 

 

Connections for Block C - Left hand side, uses Yellow plug

1) Line out Left Rear +

4) Line out Left Front

3) Line Out Ground/Earth

6) Switched Positive for Amplifier

2) Line out Right Rear +

5) Line out Right Front

 

 

Connections for Block C - Centre, uses Green plug

7) TEL +ve

10) ENA

9) CAN Low

12) TEL -ve

8) CAN High

11) REM

 

7 - Telephone Audio Input Signal - TEL +ve
8 - Second display, CLOCK (for radio sets with CAN databus communication CAN High)
9 - Second display, DATA (for radio sets with CAN databus communication CAN Low)
10 - Second display, ENA (not assigned for radio sets with CAN databus communication)
11 - Remote control, REM (not assigned for radio sets with CAN databus communication)
12 - Telephone Audio Input Signal - TEL -ve
Above based on VW Symphony 2, not applicable to all connections of this layout.

 

Connections for Block C - CD Changer Right hand side, uses Blue plug

13)  Data in

16) Voltage supply

19) Left Channel positive

15)  Clock

18) Left & Right Channel Earth

 

14) Data out

17) Control Signal

20) Right Channel positive






Jimi


Copyright © by MR2 Owners Club All Right Reserved.

Details

Created : 2011-10-06 12:04:36, Last Modified : 2011-10-06 12:04:36