Knowledge Base - How To:- Fit Clear Front Lights

The fitting process varies slightly depending on which clear indicators you buy. A minor modification is required as the orange European indicator bulbs (part number 582) have offset pins to hold them into the bulb holder. This means you have to file off one of the bayonet pins to allow them to replace the old clear bulbs. When The Genuine Toyota lamps that were designed for the Revision 5 model are used, they directly replace the old orange units. If you wish to order these from your local dealer, you will need to ask for the following parts?

Lense LH = 81520-17090
Lense RH = 81510-17090
Reflector LH = 81620-17020
Reflector RH = 81610-17020

The crystal clear lamps now available, were not designed for European MR2's so don't have a separate sidelight bulb holder. You will need to drill a new hole for the sidelight bulb holder and file the three notches to accommodate the bayonet fitting for the sidelight bulb holder.

Crystal clear lamps

Peter Jones

Copyright © by MR2 Owners Club All Right Reserved.


Created : 2011-10-05 17:51:12, Last Modified : 2011-10-05 17:51:12

Technical Disclaimer 

The MR2 Owners Club and its respective owners, editors and contributors make no representations about the suitability of the information contained in the documents, materials and related graphics published on  

By using this site, you hold the site and it's affiliates not legally responsible for any damages due to advice given here. This site and it's affiliates takes no responsibility for consequences of any actions that arise from advice given. Any opinion is given with information provided by you and can not be taken as absolute.

All repairs should be undertaken by a competent and qualified technician. By using this site, you understand and agree that all advice given and followed are at your own risk and do not hold this site or it's affiliates responsible for any damages.