Knowledge Base - How To:- Replace the Front Indicator Bulb

Look closely and you'll see the side/indicator is in two sections.
Put a piece of card over the front part to protect it and lever off the rear part with a flat screwdriver.
If they haven't been off for a while it will take some force and the plastic clip may come out too.
If so remove the plastic clip and pop it back into the hole it came from.
Before re-fitting clean up the metal tang/prong and lubricate it before popping the rear part back on.
Hopefully this will ease the removal next time.


Peter Jones

Copyright © by MR2 Owners Club All Right Reserved.


Created : 2011-10-06 10:22:17, Last Modified : 2011-10-06 10:22:17

Technical Disclaimer 

The MR2 Owners Club and its respective owners, editors and contributors make no representations about the suitability of the information contained in the documents, materials and related graphics published on  

By using this site, you hold the site and it's affiliates not legally responsible for any damages due to advice given here. This site and it's affiliates takes no responsibility for consequences of any actions that arise from advice given. Any opinion is given with information provided by you and can not be taken as absolute.

All repairs should be undertaken by a competent and qualified technician. By using this site, you understand and agree that all advice given and followed are at your own risk and do not hold this site or it's affiliates responsible for any damages.