Knowledge Base - Info:- Brake & Fog Lamp Wiring Diagrams.

Our rev 4 had the inner two lamps wired as fog lamps with higher wattage bulbs. I fitted dual filament lamp holders (from any Toyota stop/tail) and wired the side light across from the outers so we had 4 tail lamps. I then wired a 5 amp diode from the outer brake lamps to the inner ones (having connected the two inners together). I also wired a 5 amp diode in the line from the rear fog lamp switch to the inner brake lamps.

When the brakes are applied, all 4 lamps light brightly, when rear fogs are on the two inners are on all the time and the two outers act as brake lights.

Heres a couple of wiring diagrams in PDF format.

Brake and fog lamp

Brake light


Created : 2011-10-06 10:26:06, Last Modified : 2011-10-06 12:17:02

Technical Disclaimer 

The MR2 Owners Club and its respective owners, editors and contributors make no representations about the suitability of the information contained in the documents, materials and related graphics published on  

By using this site, you hold the site and it's affiliates not legally responsible for any damages due to advice given here. This site and it's affiliates takes no responsibility for consequences of any actions that arise from advice given. Any opinion is given with information provided by you and can not be taken as absolute.

All repairs should be undertaken by a competent and qualified technician. By using this site, you understand and agree that all advice given and followed are at your own risk and do not hold this site or it's affiliates responsible for any damages.