Welcome to Know Your 2
A repository of knowledge for all things MR2 related

How To:- Replace Headlamp Bulbs

Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive
Tools required
Cross head screwdriver

Materials required
Headlamp bulb part number 472 (H4 55/60w)

1- Start by turning the headlamp control switch 1 position and then use the main beam flasher. The lights will rise but will not retract.

2- Open the front compartment and locate the fuse box. Remove the 30amp RTR fuse (see image). This will disable the headlamp motors for safety reasons

3- The black shroud around the headlamp has 4 screws that require removal. The screws have a tether attached to them so they can?t fall into the headlamp storage area. Be careful in case the tethers have been broken. The shroud can be removed by pivoting it downwards.

4- The headlamp glass is held by a chrome trim with 4 screws. The screws are similar to the shroud ones, in that they have a device to stop them falling into the headlamp storage area. The whole trim can now be removed.

5- Carefully pull the headlamp glass forward and when you have enough room, reach behind and unplug the bulb connector. This may be tight fitting, so gently rock the connector back and forth to free it. Never pull the plug off by the wires. Always grasp the plug only.

6- With the headlamp removed you can remove the rubber water seal. The bulb is held in place by a wire spring. Detach this and withdraw the bulb.

7- Install the new bulb. Take care not to touch the glass section of the bulb. The bulb has 3 locating pins to prevent incorrect insertion of the bulb.

8- Replace the rubber cover ensuring the drainage pipe points downwards.

9- Refit the bulb connector, chrome surround, shroud and 30 amp RTR fuse.

Peter Jones

Copyright © by MR2 Owners Club All Right Reserved.

Print Email

Technical Disclaimer 

The MR2 Owners Club and its respective owners, editors and contributors make no representations about the suitability of the information contained in the documents, materials and related graphics published on mr2oc.co.uk  

By using this site, you hold the site and it's affiliates not legally responsible for any damages due to advice given here. This site and it's affiliates takes no responsibility for consequences of any actions that arise from advice given. Any opinion is given with information provided by you and can not be taken as absolute.

All repairs should be undertaken by a competent and qualified technician. By using this site, you understand and agree that all advice given and followed are at your own risk and do not hold this site or it's affiliates responsible for any damages.