Welcome to Know Your 2
A repository of knowledge for all things MR2 related

Info:- Checking the bodywork

Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive

Rust is now a problem on the MK2, check carefully for rust on the underside of the doors, sills, boot floor, cabin floor especially under any exterior skirts etc

Look carefully for accident damage. Crouch down and look down either side of the car to ensure the panels are aligned and check panel gaps all around the vehicle.

Remove the T-bar glasses (if fitted) and inspect the rubber seals for signs of damage and deterioration of the rubber. Leaking T-bars are very common, but can be easily fixed as long as the rubber seals are in good condition.

Test the following cable operated release mechanisms..

Boot release - Bonnet release - engine compartment release - fuel cap cover release.


Copyright © by MR2 Owners Club All Right Reserved.

Print Email

Technical Disclaimer 

The MR2 Owners Club and its respective owners, editors and contributors make no representations about the suitability of the information contained in the documents, materials and related graphics published on mr2oc.co.uk  

By using this site, you hold the site and it's affiliates not legally responsible for any damages due to advice given here. This site and it's affiliates takes no responsibility for consequences of any actions that arise from advice given. Any opinion is given with information provided by you and can not be taken as absolute.

All repairs should be undertaken by a competent and qualified technician. By using this site, you understand and agree that all advice given and followed are at your own risk and do not hold this site or it's affiliates responsible for any damages.