Welcome to Know Your 2
A repository of knowledge for all things MR2 related

How To:- K&N filter cleaning

Star InactiveStar InactiveStar InactiveStar InactiveStar Inactive



1. first use a brush (do not use a hard wire brush, the filter is cotton inside steel mesh!) to remove large debris.
2. fill a large bucket with warm water
3. add some clothes washing powder
4. insert filter, agitate, leave to soak for 15 mins, agitate and leave for 15 mins again.
5. remove filter and rinse. It should now be a grey colour. If it isn't, go back to step 2 and repeat until it's clean.
6. Once clean, leave to dry. Airing cupboard works great but is risky due to the wrath of your better half.
7. Oil the filter - don't go overboard here. If oil is dripping off it, you've used too much





Copyright © by MR2 Owners Club All Right Reserved.

Print Email

Technical Disclaimer 

The MR2 Owners Club and its respective owners, editors and contributors make no representations about the suitability of the information contained in the documents, materials and related graphics published on mr2oc.co.uk  

By using this site, you hold the site and it's affiliates not legally responsible for any damages due to advice given here. This site and it's affiliates takes no responsibility for consequences of any actions that arise from advice given. Any opinion is given with information provided by you and can not be taken as absolute.

All repairs should be undertaken by a competent and qualified technician. By using this site, you understand and agree that all advice given and followed are at your own risk and do not hold this site or it's affiliates responsible for any damages.

Facebook Feed

Facebook Latest